It has become a common phenomenon for medical practitioners to wonder about the weight capacity of their CT tables. Unfortunately, there isn’t any specific answer when considering the weight capacity. In fact, it merely depends on the model.
It can be stated that the lowest-capacity CT table would be enough for around 100 patients. However, for certain specialties, it is essential to ensure that the facility looks into models that would be able to perform the intended scans on all patients that walk through the facility. Forgetting even the smallest detail could cost the medical center a significant amount of time and money that didn’t need to be lost in the first place.
For facilities to avoid these issues, the following information is provided to help gain particular knowledge on the most popular CT scanners in the market and the respective CT tables’ load capacity.
• The GE Discovery 750 HD has a maximum load capacity of 227 Kilograms which is around 500 pounds.
• The GE Highspeed CT/e, CT/e Dual has a maximum load capacity of 180 Kilograms which is equal to 397 pounds.
• The GE Hi-Speed NXI and the Lightspeed 16, 32, QXI, RT, and Ultra has a maximum load capacity of 205 Kilograms which is equal to 452 pounds.
• The Philips Brilliance 6, 10, 16, 40, and 64 slice has a maximum load capacity of 204 Kilograms which is equivalent to 450 pounds.
• The Toshiba Aquilion 8, 16, 32, and 64 slice CT has a maximum load capacity of 205 kilograms which is equal to 452 Kilograms.
These are merely a few of the popular systems in the market. If your facility does not see your option in the list, please feel free to contact Amber USA for the necessary inquiries.
Additionally, if your facility is looking for a CT scan 16 slice, 34 slice, 64 slice, or a variety of other CT scanner slice options, Amber USA is the place for you.
Amber USA also issues a variety of other used and refurbished medical imaging equipment. At the best prices, you can obtain various equipment including MRI scanners, x-ray equipment, Mammography equipment and much more.
Contact Amber USA today for inquiries!
While it is agreed that flat panel detectors are both a practical and economical option for bringing digital radiography to medical imaging scanning, the worst can be expected if the panel faces damages as it rides around the facility.
For this reason, it is essential to take the necessary precautionary measures to ensure that the facility doesn’t face a loss through flat panel damages. This is where the use of flat panel detector cases come into play.
By using a flat panel detector case, improved protective capabilities can be ensured. A hard plastic shell would lock the panel and cover the edges of the device. These cases also offer a handle and protection from light impact damage, which could happen during patient positioning, during system movement through a hospital, as well as from fluid leakage or electronic damage.
The case also possesses an integrated scatter grid and also offers improved quality of images produced.
However, these cases do come with their own set of considerations. Flat panel cases will not be able to protect the panel from a bending force of trying to transfer a 300-pound patient. It is also suggested that flat panel cases do not be used with fixed x-ray systems.
A flat panel detector case averages between 1, 400 to 1, 500 USD. However, by having a flat panel detector case, it practically pays for itself as it shields even a single impact incident.
If you’re looking for more information on your medical imaging appliances and equipment, feel free to contact Amber USA for more details.
Additionally, Amber USA also has a longstanding reputation for issuing the highest quality used and refurbished medical imaging equipment at the best prices. A few of the many popular medical imaging devices provided by Amber USA include 128, 64, and 16 slice CT scanners, MRI equipment, x-ray equipment, and much more.
To purchase your equipment and appliances, get in touch with Amber USA today!
Since there have been incoming cuts for CR users, DR flat panel detectors are growing in the market like never before. Numerous panel manufacturers have been looking to fulfill the needs of medical facilities by providing high-quality products. However, having a lot of options might make the decision-making process a little slower for customers.
To help bring a little clarity to the decision, the following is a comparison made between two popular forms of digital flat panels provided by Vieworks and AGFA.
The similarities between the two devices can be seen as follows.
• The AGFA and Vieworks panels are identical when considering the construction of both devices.
• Both panels offer gadox or cesium scintillators.
• Both panels can be purchased in the standard sizes of 14” x 17” and 17” x 17”.
The difference between the two devices can be seen below.
• For the software suite of each device, AGFA panels use NXMusica whereas Vieworks uses VXVue.
• Vieworks flat panels have an AP mode which provides the ability to communicate directly with the workstation without the need for transmission through a control box. This feature is helpful for small to medium-sized facilities where traffic levels would allow panels to be shared between fixed rooms and portable x-ray systems.
• Vieworks panels can be purchased in 10” x 12” sizes for pediatric uses.
• The price of AGFA panels has been known cost around 20% more than Vieworks panels.
If the best outcomes are required by your medical imaging facility, feel free to contact Amber USA for more details on medical imaging equipment. Additionally, Amber USA also issues a variety of used and refurbished medical imaging equipment such as used GE x ray equipment, Siemens MRI machines, CT scanners of an array of slices, and much more.
For more details on your purchase, contact Amber USA today.
What some vendors call refurbished might not match up to what another vendor would call refurbished. Amber USA is well aware of the ambiguity of the term “refurbished.” For that reason, Amber USA has devised the following information to make potential buyers aware of the refurbishment process used.
The table is disassembled; the parts are cleaned, repainted, and refinished. The table is then taken to a staging bay to be reassembled. Bearings, cables, and connectors are thoroughly inspected and replaced as required. Once completed, the table is analyzed to follow OEM specifications.
The process is the same for this part of the system. The external parts of the support system are then inspected, cleaned, repainted, and replaced as required. The internal moving parts are thoroughly cleaned and checked for sticking, hang-ups, or grinding. The x-ray console and collimator and also inspected and parts are replaced as required. Once refinished, the components are then sent for reassembling according to OEM specifications.
The chest stand.
Similar to the tube and table of the x-ray machine, the process for this portion is also the same, i.e., Disassemble the chest stand, inspect the parts, clean the parts and replace them as required, and refinish the components. One finished, the parts are reassembled as per OEM specifications. However, testing is needed for the DICOM to confirm functionality.
Once the many portions of the x-ray equipment have been thoroughly refurbished, the system is reassembled as a single unit and carefully adjusted and tested as required. For a digital system, there would be specified care taken for testing the detector for bad pixels.
Once all procedures have been completed, the room would then be ready for customer preview. Once a buyer is interested in the system, the components are disassembled and shipped to the buyer. The reinstallation process is then conducted from the buyer’s end.
Amber USA makes it a priority to provide the best refurbishment process, not only for x-ray equipment but for all medical imaging equipment issued to buyers.
If you’re looking for the highest quality used and refurbished medical imaging equipment including CT scanners, MRI machines, an ultrasound machine for sale and much more, contact Amber USA now for inquiries!
For medical facilities, when thinking of stepping up the C-Arm game, it is essential to consider the budget. It may seem like pain physicians are making the most use of out an already existing full-sized C-Arm, so other options may have to be considered. With that being said, the first thing that comes to mind is a mini-C-Arm. The compact design provided by C-Arms is a perfect fit for the minimal work needed for the more straightforward issues, such as pain in hands or feet.
But just how much would be needed to spend for bringing a mini C-Arm into the facility?
Used mini C-Arms can vary significantly in price depending on age, features, and manufacturers. Depending on those factors, it is likely that the amount could range between 19,000 to 50,000 USD.
To determine which C-Arm is right for which practice, two major factors would come into play and includes the equipment options and the services offered.
The factor that would affect the price the most would be the model of the mini C-Arm chosen. Flat digital detector systems may fall on the higher end, whereas, systems like the OEC 6600 may appear on the lower end of the spectrum.
Mini C-Arm services.
The services offered for these systems would typically include refurbishment, delivery, application training session, set-up, and a few other factors depending on the vendor.
Keep in mind that the purchase is entirely up to the buyer itself. The balance between the equipment chosen and the services offered can be customized to fit buyer requirements.
If you require assistance in choosing the right mini C-Arm for your medical practices, feel free to contact Amber USA. Amber USA offers a variety of used and refurbished radiology equipment according to customer preferences to make sure each and every buyer is satisfied with their purchase to provide efficient services for patient needs.
Contact Amber USA now for inquiries on your purchase!
The medical field is often very hectic. The biggest dilemma faced by many medical professionals is the efficient use of time. Upgrading to better radiology equipment can actually help with efficient utilization of time. Minimizing delays in medical imaging can actually help a lot in terms of timesaving in the long run. If you’ve been hesitant about investing in an upgrade to your x-ray equipment, it’s time to be sure.
Digital Radiography is the timesaver that you’ve been looking for. Cut down the time taken for image processing by more than 10 to 15 times with an upgrade. Also, that with little to no retakes required. This is not just timesaving for you but better for your patients as well. That gives you extra time to review the results and ample time to decide or obtain a second opinion on critical cases.
Moreover, your x-ray images can now be reviewed on many platforms including other computers, laptops or even tablets. This accessibility has also provided more storage options even expanding to cloud storage.
All in all, the timesaver that you’ve been wanting is here to help you. Contact Amber Diagnostics now to find out about the Refurbished X Ray Equipment available for you. Review your needs and wants with the budget available and obtain expert advice on the best option for your facility. It’s high time to upgrade your radiology equipment and reap its benefits. And who better to help you than Amber Diagnostics with over 25 years of experience in the medical imaging equipment business. So hurry up and call the service team at Amber Diagnostics now!
Millions of people suffer from osteoporosis with every one in three women suffering from bone fractures because of their condition. Because of the large volume of patients that have osteoporosis, there is a huge demand for bone densitometers in the medical imaging equipment industry. A bone densitometer is a useful device used for diagnosing osteoporosis and determining the best direction to go towards for treatment.
The different types of bone densitometers can be categorized into three options, so it is wise to understand the difference between each one and the benefits so the right device can be obtained for medical practices.
Pencil Beam DXA.
This device is an excellent choice of bone densitometers and uses the original method for bone densitometer tests. The images are produced using a single beam of x-ray to achieve precise scans. The scans may take a long time since it takes time for the single beam to scan the whole body. For clinics with fewer patients, the Pencil Beam DXA is the best option.
If a clinic or hospital has a higher volume of patients, this device is ideal since it delivers shorter scan times. This is because the Fan Beam DXA uses multiple x-ray beams on the body to capture the parts of the body one at a time. However, the images produced are not high quality.
Narrow Angle Fan Beam.
This third type of bone densitometer also uses multiple x-ray beams across the body and also makes multiple passes across the body across the entire body for capturing more images. Clear image quality is achieved through these devices.
If you need to contact an expert to obtain information on which densitometer is right for your medical facility, Amber USA is the place for you. Amber USA issues some of the highest quality used and refurbished medical equipment including bone densitometers to fit a variety of different medical practices’ requirements accompanied by the best service in the market.
Think of a camera that captures images. Now think of it using x-rays to do so instead of visible light and now you’ve got an x-ray machine. X-rays penetrate different materials in different degrees. Therefore, bones, tissues, muscles, and tumors can be seen on film at varying levels of exposure. And these images help radiologists and medical officers treat their patients in an innumerable number of ways.
But now x-ray machines do not have to be a luxury. Instead, in many clinical settings, it is a must. Owing to its many uses and purposes, acquiring an x-ray machine for your clinic or department can be highly beneficial.
Nevertheless, the decision must be well thought out. There are so many options for x-ray machines out there. But, choosing the best fit for your budget and purpose can even be challenging at times. But that is what you’ve got professionals like Amber Diagnostics here for you.
Today, there is no reason to spend thousands of dollars on buying a brand new x-ray machine. That is when you can be purchasing a better-upgraded version for that same price range.
Used and refurbished x-ray machines of all top brands including Used GE X Ray Machines are available at Amber Diagnostics. These x-ray machines have undergone thorough testing to prove their functionality, usability, and accuracy. There is simply no reason to be clouding your mind with doubts about x-ray machines.
Instead, feel free to contact the Amber Diagnostics service team right now. We are always ready to help out clients in any and every manner possible. Call now and get the remaining 101 questions answered and take the first step to acquire your own x-ray machine.
The process of obtaining your radiology equipment consists of a series of steps. It does not end at the purchase. It needs to be packed, shipped or installed to put it in brief. While selecting the most suitable radiology equipment that fits your situation and budget is definitely important, we know that we should not part ways at the purchase itself. As the shipping, installation and maintaining process is not that simple, we are here to guide you.
At Amber Diagnostics, we make sure that your medical imaging equipment is safely packed and shipped. Your equipment is bubble and shrink wrapped, boxed or vapor wrapped and crated by our expert warehouse team. We even handle overseas shipping via sea or air.
We do not dust ourselves off at that. Installation of medical imaging equipment cannot be done just anywhere. The site selected for the purpose must comply with local authority regulations for installation of radiology equipment. The chosen location must be adequately prepared to be suitable for the use. That involves HVAC, power, wiring requirements and so on. But don’t worry. You will be provided with a specific blueprint for the selected make and model that includes all these.
After that comes the much-awaited installation performed by our service engineer and technician. The Amber Diagnostic team will connect, calibrate and even test the delivered radiology equipment for quality assurance.
That is not all. We even provide maintenance services as needed. Our professional service team can help you with preventative maintenance and offers 24-hour response. You can put your mind to rest as our 25,000 square foot warehouse contains a vast array of parts of medical imaging equipment. Are you looking for Used GE X Ray Machines at affordable prices? Contact the service team at Amber Diagnostic right away to purchase the best used and refurbished medical imaging equipment.
When looking to purchase C-Arms, one thing buyers constantly demand from medical imaging suppliers is a device that “isn’t too old.” The fact is that it is quite rare to find pre-owned C-Arms that are only a few years old since the original purchaser of the system doesn’t necessarily have a reason to replace or sell the device due to its decade (or more) of service.
However, the truth is that the age of a C-Arm doesn’t necessarily define the overall quality and performance of that system. Many factors can determine the efficiency of a used C-Arm and include:
• The image quality.
When considering a used or refurbished C-Arm, it is essential to look for the most important feature – which is image quality. C-Arms are used to perform fluoroscopy; this means that image quality is crucial during minimally invasive medical procedures for patients. While age does play a small role in defining the image quality of a used system, how the system has been used will have a more significant impact on the image quality.
• Prior use.
Determining how effectively the previous owner used the C-Arm is vital. While the age of the system does depend on the prior use to an extent, the better rule to determine prior use depends on what the C-Arm has endured as well as the location. C-Arms used in smaller clinics might be of better quality than a C-Arm that has been used in a large hospital.
• New, used, or refurbished.
Currently, there are new C-Arms that are hitting the markets at affordable prices, which is convenient for multiple medical facilities.
However, used equipment offers quality as well as prices that are around 1/8th the cost of a brand new device.
Refurbished equipment, on the other hand, offers the best of both worlds – where new parts have been added to a used system which can extend the life of the system and provide quality imaging.
Choosing the right medical imaging system for your medical facility can be tough, but Amber USA makes it easy. Amber USA provides the option of high-quality used and refurbished equipment along with services that can help clients decide which system is right for their facility. Are you looking for a used or refurbished c arm or any other medical imaging equipment for your medical practices? Contact Amber USA now for inquiries!